BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRES™ EXL9818 Opaque Polycarbonate Copolymer Flame Retardant Resin
UL94 Non-Brominated Non-Chlorinated FR. Good Modulus and High Heat
LNP™ ELCRES™ EXL9818 is a Flame Resistance High Modulus Polycarbonate. Non-Brominated Non-Chlorinated Flame Retardant Siloxane Copolymer ELCRES
The Material is Available in Opaque Color
The Grade is from the LNP™ ELCRES™ Copolymer EXL Series, which offers a Unique Low Temperature Ductility, Chemical Resistance, and Wide Temperature Impact Strength
LNP™ ELCRES™ EXL Resin Range offers
- Lower Notch Sensitivity
- Excellent Release
- Lower Injection Pressure, Ease of Processing
- Low-Temperature Impact Strength
- Better Weather Ability, Excellent Retention of Mechanical Properties upon Outdoor Exposure
- High Knitline Strength Polycarbonate for a Good Surface Finishing
- Better Heat Aging for Long Term Retention Performance vs other Polycarbonate Resin
- More Hydrolytically Performance
- UL94 Rating
ELCRES™ EXL9818 is a Opaque Color ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 119
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 138
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 21
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 20
Material Flexural Modulus
Flexural Modulus, ISO 178, 2 mm/min, MPa = 2450
ELCRES™ EXL9818 Resin are UL94 - V0@ 1.50 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.