BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LNP™ ELCRES™ SLX2271AML Polycarbonate Siloxane Copolymer Resin
Scratch Resistance, Outdoor, Transparent Clear Antimicrobial Compound
LNP™ ELCRES™ SLX2271AML Resin is a Transparent Antimicrobial Compound Polycarbonate Siloxane Copolymer with Good Scratch Resistance for Outdoor Applications
The Material is Available in Transparent Clear
LNP™ ELCRES™ SLX2271AML Resin has added Antimicrobial
The LNP™ ELCRES™ SLX Resins Portfolio is an Amorphous Family of Polycarbonate Copolymer Resin Blends, offering Outstanding Retention of Color, Gloss, Transparency and Toughness after Weathering combined with the Heat and Impact Performance Associated with LNP™ ELCRES™ Resins.
This Unique Copolymer creates a Self Protecting Layer upon Exposed to UV Light, Dramatically increasing the Resistance to UV Degradation Compared to Standard UV Stabilized Polycarbonate.
LNP™ ELCRES™ SLX Resin Range offers
- Reduce Finishing Cost. Non Painting Required or UV Coatings
- Oustanding Retention of Transparency, Color, Gloss
- High Refractive Index
- Improved Depth of Color
- Retention of Mechanical Properties
- Lower Environmental Emissions
ELCRES™ SLX2271AML is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 121
Vicat Softening Temperature Rate
Vicat Softening Temperature rate , B50 = 141
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 20
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 22
Material Flexural Modulus
Flexural Modulus, ISO 178, 2 mm/min, MPa = 2487
ELCRES™ SLX2271AML Resin are Non UL94 Listed
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Elcrin, Elcres, Lexan, Noryl, Ultem, Xenoy, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.