BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRIN™ CRX1314BT Polycarbonate Copolymer Renewable Feedstock Resin
ISCC+ Mass-Balance Certification to Lower
Carbon Footprit. Transparent
LNP™ ELCRIN™ CRX1314BT Resin is Transparent Clear Polycarbonate Copolymer Bio-based Ingredients in its Formula.
Incorporates Renewable Feedstock through ISCC+ Mass-balance Certification to Lower Carbon Footprint
LNP™ ELCRIN™ CRX1314BT Resin is Transparent Clear Polycarbonate Copolymer Resin features Excellent Chemical Resistance in Combination with Excellent Impact Strength and
Good Optical Properties (Thin Wall Transparency). This features Transparency to Translucency based on Thickness
An Excellent Candidate for a Wide Variety of Transparent and Translucent applications that require Improved Chemical Resistance and Ductility for Electronics, Consumer, and Industrial Applications.
The Material is Available in Transparent Clear and has Excellent Low Temperature -30 °C Ductility with Medium Flow Properties
LNP™ ELCRIN™ CRX1314BT Resin offers Non PFAS Intentionally Added.
ELCRIN™ CRX1314BT is a Transparent Clear ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 129
Vicat Softening Temperature Rate
ELCRIN™ CRX1314BT : Vicat Softening Temperature Rate , B120 = 148
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/2.16 kgf = 11.0
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/2.16 kg = 10
Material Flexural Modulus
ELCRIN™ CRX1314BT has a Flexural Modulus, D790, 1.3 mm/min, MPa = 2250
ELCRIN™ CRX1314BT Resin are UL94 - HB@ 0.75 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.