BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRIN™ DF0036RCC Up to 50% PCR Content Polycarbonate. 15% Glass Fiber
Opaque Black or High Reflective White Non Chlorinated, Non Brominated
LNP™ ELCRIN™ DF0036RCC Resin is Opaque Color Polycarbonate with 15% Glass Fiber Reinforced with up to 50% Post-Consumer Recycling (PCR) Polycarbonate
It comes in High Reflective White or Opaque Black with Light Blocking at 0.5 mm
LNP™ ELCRIN™ DF0036RCC Resin is a Non Chlorinated, Non Brominated Flame Retardant with Thin Wall Capabilities.
This LNP™ ELCRIN™ Grade offers
- Low Warpage
- Good Ductility
- Good Processability
- UL94 Rating
- Certified Green Products, SCS
ELCRIN™ DF0036RCC is a Opaque Color ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 120
Vicat Softening Temperature Rate
ELCRIN™ DF0036RCC : Vicat Softening Temperature rate , B50 = 127
Material MFI / Melt Flow Rate
Melt Flow Rate, 300°C/1.2 kgf = 11
Material Melt Volume Rate, MVR
Melt Volume Rate, 300°C/1.2 kg = 9
Material Flexural Modulus
ELCRIN™ DF0036RCC has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 4650
ELCRIN™ DF0036RCC Resin are UL94 - V0@ 1.50 mm ~ 3.00 mm
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.