BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
ELCRIN™ WF006XIQ PBT Resin Opaque Color with 37% Post Consumer Recycled
General Purpose Grade. 30% Glass Reinforced with Excellent Stiffness
LNP™ ELCRIN™ WF006XiQ Resin is Opaque Color Polybutylene Terephthalate (PBT) General Purpose Resin. 30% Glass Reinforced with High Flow
The Material is Available in Opaque Color, General Purpose with Excellent Strength, Stiffness and Dimensional Stability
LNP™ ELCRIN™ WF006XiQ Resin has more than 37% Post Consumer Recycle (PCR) Content though Chemical Recycling
LNP™ ELCRIN™ iQ Resin are produced with Technology which uses De-Polymerization to process Single Used Recycled PET Plastic into Polybutylene Terephthalate (PBT)
They may contained up to 60% Recycled Weight Content
LNP™ ELCRIN™ Reduces Carbon and Energy Footprint while offering Similar Properties of Virgin Material
ELCRIN™ WF006XiQ is a Opaque Color ROHS Compliance Polycarbonate Resin
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 203
Vicat Softening Temperature Rate
ELCRIN™ WF006XiQ : Vicat Softening Temperature rate , B50 = N/A
Material MFI / Melt Flow Rate
Melt Flow Rate, 250°C/5.0 kgf = 52
Material Melt Volume Rate, MVR
Melt Volume Rate, 250°C/5.0 kg = 38
Material Flexural Modulus
ELCRIN™ WF006XiQ has a Flexural Modulus, ISO 178, 2 mm/min, MPa = 9100
ELCRIN™ WF006XiQ Resin are Non UL94 Listed
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.