LEXAN™ SLX2432T Transparent Polycarbonate Resin. Outdoor Performance

Medium Viscosity Enhanced UV Stabilization and added Easy Release

LEXAN™ SLX2432T Resin is a Outdoor Chemical Resistant Polycarbonate. Siloxane Copolymer LEXAN with Medium Viscosity and Rated UL94 V-2

The Material is Available in Transparent Clear

LEXAN™ SLX2432T Resin has Easy Release and Enhanced UV Stabilizer.

The LEXAN™ SLX Resins Portfolio is an Amorphous Family of Polycarbonate Copolymer Resin Blends, offering Outstanding Retention of Color, Gloss, Transparency and Toughness after Weathering combined with the Heat and Impact Performance Associated with LEXAN™ Resins.

This Unique Copolymer creates a Self Protecting Layer upon Exposed to UV Light, Dramatically increasing the Resistance to UV Degradation Compared to Standard UV Stabilized Polycarbonate.

LEXAN™ SLX Resin Range offers
- Reduce Finishing Cost. Non Painting Required or UV Coatings
- Outstanding Retention of Transparency, Color, Gloss
- High Refractive Index
- Improved Depth of Color
- Retention of Mechanical Properties
- Lower Enviromental Emissions

LEXAN™ SLX2432T is a Transparent Clear ROHS Compliance Polycarbonate Resin

LEXAN™ SLX2432T Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 118°C

Vicat Softening Temperature of LEXAN™ Polycarbonate SLX2432T Resin

Vicat Softening Temperature Rate, B50 = 135

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/1.2 kgf = 10

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/1.2 kg = 9

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2500

LEXAN™ SLX2432T Copolymer Resin has 0.50 ~ 0.70 Shrinkage, Flow, 3.2 mm. %

LEXAN™ SLX2432T Polycarbonate Resin are UL94 - V2@ 1.50 mm ~ 3.00 mm

LEXAN COPOLYMER Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.