top of page

LEXAN™ XHT2171 Opaque Color Polycarbonate Resin. Copolymer High Heat

For Complex Thin Wall Features, High Flow. Extreme High Heat 155°C

LEXAN™ XHT2171 Resin is a Copolymer High Heat Polycarbonate. General Purpose Siloxane Copolymer LEXAN with Improved High Flow

The Material is Available in Opaque Color

LEXAN™ XHT2171 Resin has High Heat Temperature 155°C and Developed for Thin Wall or Complex Features

The LEXAN™ XHT Resins – Advanced Performance for Extreme Heat Conditions, these Unique Grades address Customer need for Flame Retardant Polycarbonate based Materials in the Temperature Range of 140°C to 195°C. They offer Exceptional Clarity and Color Stability over a Long Lifespan. The Material Provide Greatly Improved Flow and Impact Compared to other High Heat Polycarbonate.

LEXAN™ XHT Resin Key Performance Features:

- Optical Clarity
- Resistance to Cracks and Haze during Metallization
- 30% greater Flow Length vs. Competitive Materials
- Resistance to Yellowing under UV Aging
- Ease of Processing
- Good Flow for Even Thin Walls

LEXAN™ XHT2171 is a Opaque Color ROHS Compliance Polycarbonate Resin

LEXAN™ XHT2171 Resin HDT, 1.82 MPa, ASTM A648, 3.2 mm, unannealed is at 147°C

Vicat Softening Temperature of LEXAN™ Polycarbonate XHT2171 Resin

Vicat Softening Temperature Rate, B50 = 164

Material MFI / Melt Flow Rate

Melt Flow Rate, 300°C/2.16 kgf = 22

Material Melt Volume Rate, MVR

Melt Volume Rate, 300°C/2.16 kg = 19

Material Flexural Modulus

Flexural Modulus, ISO 178, 2.0 mm/min, MPa = 2400

LEXAN™ XHT2171 Copolymer Resin has 0.60 ~ 0.90 Shrinkage, Flow, 3.2 mm. %

LEXAN™ XHT2171 Polycarbonate Resin are Non UL94 Rated

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.

bottom of page