NORYL™ NH8006 ECO Flame Retardant PPE+HIPS with 30% Glass Reinfroced

High Heat HDT Outdoor Applications, Non Brominated, Non Chlorinated FR

NORYL™ NH8006 PPE + HIPS is a Non-Reinforced Non Brominated, Non Chlorinated Flame Retardant Blend of Polyphenylene Ether (PPE) + High Impact Polystyrene (HIPS). It has 30% Glass Reinforced and High Heat HDT Performance

It Features Strong Electrical Performance, Low Moisture Absorption, Dimensional Stability, and Hydrolytic Stability

NORYL™ NH8006 PPE + HIPS Resin is an Excellent Candidate for Indoor and Outdoor Electrical Housings, Components and Connectors.

This Resin is from the Family of NORYL™, Modified PPE Resins Consisting of Amorphous Blends of PPO™ Resin (Polyphenylene Ether) and Polystyrene. Inherent Benefits of PPO resin (Affordable High Heat Resistance, Good Electrical Properties, Hydrolytic Stability and Ability to use Non-Halogen FR Packages), with Excellent Dimensional Stability, Good Processibility and Low Specific Gravity.

NORYL Resins offer a Balance of Mechanical and Chemical Properties and maybe Suitable for a Wide Variety of Applications

As a Blend NORYL™ Resin, offers

- Chemical Resistance - Good Resistance to Many Cleaning Agents & Acid
- Fire Retardancy - Available in Non Halogenated Fire Retadant Grades & Low Toxicity Requirement for Transportation Grade
- Electrical Properties - High Dielectric Strength Properties
- Strength & Stiffness - Virtually Unaffected by Humidity, Impact Strength
- Creep Resistance - Elevated Temperature, Improved with Added Filler
- Low Shrinkage - Excellent Control in Dimension

NORYL NH8006 PPE + HIPS has 0.20 ~0.25 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 149

Vicat Softening Temperature Rate

Vicat Softening Temperature Rate, B50 = 156

Material MFI / Melt Flow Rate

Melt Flow Rate, 280°C/5.0 kgf = 2.1

Material Melt Volume Rate, MVR

Melt Volume Rate, 280°C/5.0 kgf = 6

Material Flexural Modulus

8000

NORYL™ NH8006 are UL94 - V0, 2.00 ~ 6.00 mm Rated

NORYL Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.