BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
: Vietnam : Indonesia : Thailand : Malaysia : Philippine : India
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ EXELL D ST Sheet. Outdoor, UV Resistance Coated Polycarbonate
Virtually Unbreakable, Transparent for Overhead or Vertical Glazing
LEXAN™ EXELL D ST Sheet offers 10 Year Limited Warranty against Breakage, Yellowing, and Loss of Light Transmission
The Material Blocks 99.9% UV-Ray Below 400 nm Range
Bottom Rough Texture for Light Diffusion
LEXAN™ EXELL D ST Sheet passed
BS 476 Part 7 Method of Test to Determine the Classification of the Surface Spread of Flame of Products - Class 1Y
EN13501-1 Fire Test to Building Material - B, s1, d0
EN15725-1 Extended Application Reports on the Fire Performance of Construction Products and Building Elements
EN ISO 11925-2 Reaction to Fire Tests — Single-flame Source Test
NFPA 130 - Standard for Fixed Guideway Transit and Passenger Rail Systems, provides Fire Protection and Life-safety Requirements for Underground, Surface and Elevated Fixed Guideway Transit and Passenger Rail Systems
ISO 6000 CENT/TS 16516 VOC Emission Testing - A+/E1
ANSI/NFPA Minimum Building Design, Construction, Operation, and Maintenance Requirements Necessary to Protect Building Occupants from Danger caused by Fire, Smoke, and Toxic Fumes - Class A
ECE R43 Glazing Approved
Available in
Standard Color : Clear - 112
Standard Color : Bronze - 5109
LEXAN™ EXELL D ST Sheet Standard Available Thickness
LEXAN™ EXELL D ST Sheet @ 3.00 mm
LEXAN™ EXELL D ST Sheet @ 4.00 mm
LEXAN™ EXELL D ST Sheet @ 5.00 mm
LEXAN™ EXELL D ST Sheet @ 6.00 mm
LEXAN™ EXELL D ST Sheet @ 8.00 mm
Unique Surface Appearance of LEXAN™ EXELL D ST Polycarbonate Sheet
LEXAN EXELL D ST Sheet has a Polish Top Surface & Rough Texture Bottom Surface
Features & Benefits of Advance LEXAN™ EXELL D ST Polycarbonate Sheet
High Gloss Surface
Printable
High Impact Strength
Dust Visibility Diffusion
Dimensional Stability
Lightweight
Formable
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.