BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
LEXAN™ MARGARD™ HLGA2 Sheet. Hardcoated High Optical Lamination Grade
No 1 Mars Resistant Indoor Application. High Optical Low Distortion
LEXAN™ MARGARD™ HLGA2 Sheet is 1 side Hard Coated Sheet offering the Highest Abrasion Resistance ( 1 ~ 3 Taber Haze Cycle based on ASTM 1044 )
It is High Optical Quality with the Lowest Distortion ( 0.02 DIN 52305/-A-AZ, Vehicles Glazing ) thus being the Best Sheet for Glass Lamination
SABIC LEXAN™ MARGARD™ HLGA2 is for Flat Application & Interior Environment only
Taber Haze 1% ~ 2%
Available in
Standard Color : Clear - 112
LEXAN™ MARGARD™ HLGA2 Sheet Standard Available Thickness
LEXAN™ Margard™ HLGA2 Sheet @ 1.00 mm
LEXAN™ Margard™ HLGA2 Sheet @ 1.50 mm
LEXAN™ Margard™ HLGA2 Sheet @ 2.00 mm
LEXAN™ Margard™ HLGA2 Sheet @ 2.50 mm
LEXAN™ Margard™ HLGA2 Sheet @ 3.00 mm
LEXAN™ Margard™ HLGA2 Sheet @ 4.00 mm
LEXAN™ Margard™ HLGA2 Sheet @ 5.00 mm
LEXAN™ Margard™ HLGA2 Sheet @ 6.00 mm
Unique Surface Appearance of LEXAN™ MARGARD™ HLGA2 Polycarbonate Sheet
LEXAN MARGARD™ HLGA2 Sheet has a Polish, Hard Coated Top Surface & Polish Bottom Surface
Features & Benefits of Advance LEXAN™ MARGARD™ HLGA2 Polycarbonate Sheet
Indoor Lamination Grade
High Optical
Low Distortion
Indoor Best Hard Coated
Flame Smoke Toxicity
High Gloss Surface
High Impact Strength
Inherent “Crystal Clear” Transparency
Lightweight
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.