LEXAN™ MARGARD™ MR10 Sheet. Optical Hard Coat Outdoor Polycarbonate

2 Side UV Resistant for Flat Application or Marine Environment

LEXAN™ MARGARD™ MR10 is a Great Candidate for Outdoor Applications

Both Side Hard Coated offer a Good Abrasion Resistance such as Daily Cleaning.
The Material Blocks 99.9& UV-Ray Below 400 nm Range

The Hard Coating offer Good Chemical Resistance , which is why The Surface of LEXAN™ MARGARD™ MR10 cannot be Printed

LEXAN™ MARGARD™ MR10 passed

ANSI Z26.1-1996 AS7 - Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways - PASS

AS/NZA 1530.3 - Methods for Fire Tests on Building Materials, Components and Structures

ANSI Z26.1 - AS4

ASTM E1354 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

ASTM D1929-16 - Laboratory Determination of the Flash Ignition Tand Spontaneous Ignition Temperature of Plastics using a Hot-air Furnace.

Available in
Standard Color : Clear - 112
Standard Color : Bronze - 5109
Standard Color : Grey - 713

LEXAN™ MARGARD™ MR10 Sheet Standard Available Thickness

LEXAN™ Margard™ MR10 Sheet @ 1.50 mm
LEXAN™ Margard™ MR10 Sheet @ 2.36 mm
LEXAN™ Margard™ MR10 Sheet @ 3.00 mm
LEXAN™ Margard™ MR10 Sheet @ 4.50 mm
LEXAN™ Margard™ MR10 Sheet @ 5.60 mm
LEXAN™ Margard™ MR10 Sheet @ 6.00 mm
LEXAN™ Margard™ MR10 Sheet @ 9.50 mm
LEXAN™ Margard™ MR10 Sheet @ 12.7mm

Unique Surface Appearance of LEXAN™ MARGARD™ MR10 Polycarbonate Sheet

LEXAN MARGARD™ MR10 Sheet has a Polish, Hard Coated Top Surface & Polish, Hard Coated Bottom Surface

Features & Benefits of Advance LEXAN™ MARGARD™ MR10 Polycarbonate Sheet

UL Rated
High Gloss Surface
High Impact Strength
Inherent “Crystal Clear” Transparency
Dimensional Stability
Lightweight
Flat Applications Only

LEXAN™ MARGARD MR10 Hard Coated PC Sheet | Wah Lee Group

LEXAN Sheet Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.