XENOY™ XL1562 PC/PBT Resin. Impact Strength with Chemical Resistance

Unique Flow Properties and Good UV Stability for Wide Applications

XENOY™ XL1562 PC/PBT Resin is a Impact Modified Blend with Outstanding Chemical Resistance.

Unique Flow Properties and Good UV Stability

XENOY™ XL1562 is from the Family of XENOY™, a Blend of Plastic consisting of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance

As a Blend XENOY™ Blend Resin, offers

- Toughness - Excellent Mechanical & Electrical Properties, Balanced Impact with Flow,
- Excellent Ductility over Temperature Range. The impact is Maintained Down to -40°C
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Long Term Properties with Excellent UV Stability
- Weatherability with UV Stabilizer
- Lubricity Smooth Part on Part for Demanding Applications
- Good Temperature Performance Sufficient for Paint Cure up to 130°C

XENOY XL1562 PC/PBT has 0.8 ~ 1.1 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

SABIC XENOY™ XL1562 Vicat Softening Temperature rate , B50 = 125

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/5.0 kgf = 27

Material Flexural Modulus

XENOY™ XL1562 Flexural Modulus, ISO 178, 2 mm/min = 2000 Mpa

XENOY™ XL1562 are UL94 - HB, 1.50 mm ~ 3.00 mm Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.